Hi There,

I found this article claiming ASE 15.7 running better on raw devices.

SAP Sybase ASE 15.7 Raw Device Setup Centos Linux Worked Example

Kindly advice me if this has SAPnote and applicable on ERP 6.0 EHP7 (RHEL6.5). thanks.

Regards,

AM

Dear gurus,

We have an issue in our PRD system under FlexFrame platform. We SAP NW 7.4 (SP03) with ASE 15.7.0.042 (SuSe SLES 11 SP1) running as BW system.

While uploading data from ERP system, the transactional log was filled. We can see in <SID>.log:

Can't allocate space for object 'syslogs' in database '<SID>' because 'logsegment' segment is full/has no free extents. If you ran out of space in syslogs, dump the transaction log. Otherwise, use ALTER DATABASE to increase the size of the segment.

After this, we increase the transactional log (disk resize). Then, executed ALTER DATABASE <SID> log on <LOGDEVICE> = '<size>'

While ALTER is running the log filesystem was filled (100%), after this, <SID>.log began to grow tremendously.

We stopped Sybase and now, when we try start it all FF node will be down. The filesystem has free space (around 10 GB)

Could you help us?

Add: We think that a posible solution could be to delete the transactional log due to the fact that we understand that the failure is related to this log (maybe corrupted?)

Regards

The http://scn.sap.com/community/sybase-ase/blog/2013/05/31/backup-challenges-on-sybase is not available

Urgent:

ASE 15.7

I tried a cross-platform dump and load after running sp_flushstats , checkpoint on the source database,

while loading on the destination server Il get the error 'database not quiesced , run sp_flushstats'

Tried

>quiesce database hold_sct hold sctdb for external dump to "/dbdumps/sctdb/sctdb.gtlmain.20140612.dmp"

go

This did not work dump did not take place : Message in the log indicated quiesce completed successfully

Process 208 successfully executed QUIESCE DATABASE with HOLD option for tag hold_sct. Processes trying to issue IO operation on the quiesced database(s) will be suspended until user executes Quiesce Database command with RELEASE option.

I tried breaking up the command

1. quiesce database hold_sct hold sctdb for external dump

2. dump database sctdb to "/dbdumps/sctdb/sctdb.gtlmain.20140612.dmp"

this message is displayed

QUIESCE DATABASE is in progress on database sctdb. After it completes, this dump will resume automatically.

dump database command is locked by the quiesce command ,

Does this take a long time (DB size is only 3GB)

Quick solution really appreciated

brgds

Lakshmi Reddy

Hello SAP Gurus !

We are in process of Installing SAP ASE 15.7 DB on win 2008 R2 64bit. When i Run setup file on ASE folder and after following the required screen at the last phase it comes out throwing error saying New Adaptive service unable to create?.

We tried all the options but no luck, Can anyone in this group help me out of it, Your early reply really appreciated.

Thanks -

Amjad

Important Information

An issue has been identified that can potentially cause incorrect results in an SAP Business Warehouse system running on SAP Adaptive Server Enterprise.
The problem has been observed whenever the optimization goal 'allrows_dss' or another optimization goal that includes optcriteria 'advanced_aggregation'is used for an SQL statement. This is typically the case for SAP BW systems. SAP ERP systems running on ASE are not affected. In SAP ERP systems optimization goal 'allrows_mix' has been configured.

Details and corrections are available in SAP Note 2026328- SYB: Incorrect results with SUM aggregation on decimal fields.We strongly recommend to implement the corrections in SAP BW as soon as possible.

Getting Started with SAP Applications Using SAP Adaptive Server Enterprise

The aim of this document is to help you get started with the SAP Adaptive Server Enterprise (ASE) database that is run with SAP applications.

Continuous Availability Solutions for SAP Adaptive Server Enterprise

Over the past years, SAP ASE has supported a number of high availability solutions that work as a complement to hardware solutions in providing reduced downtime and recovery effort for applications. ASE HADR in SAP ASE 16 will enhance the offerings, bringing the same transparent client failover, zero data loss, and ease-of-use capability that cluster systems enjoy with ASE installations that are long distances apart.

On the Road to an Enterprise Cloud

Customer demands for support of virtualization are rapidly growing. SAP offers support for running its applications in virtualized cloud environments. You can start your projects and can bring the innovations from SAP into production in a matter of weeks instead of months, with complete flexibility of deployment choice.
SAP Landscape Virtualization Management (LVM) is available for SAP Business Suite on SAP Adaptive Server Enterprise.

For more information, read thisarticle, and SAP Notes 1630050 and 1492000.

DBA Cockpit: Automatic Table Maintenance for SAP ASE

Maintaining tables, indexes and data partitions is crucial for productive database systems. Continuous insertion, update and deletion of data induces fragmentation, bad cluster ratios and inaccurate optimizer statistics. The article shows how the DBA Cockpit and its automatic table maintenance for SAP ASE ensures good cluster ratios on tables and indexes, frees up unused space and ensures accurate optimizer statistics.

General Availability of SAP Adaptive Server Enterprise

SAP Business Suite on ASE is available for SAP Business Suite 7i2010, 7i2011, and 7i2013.
For more information, refer to SAP Note 1554717.

Hello experts,

just wondering if somebody already reviewed thoroughly latest guide for best practices on SAP Sybase ASE?

I am talking about the document from note 1680803 - SYB: Migration to SAP Adaptive Server Enterprise - Best Practice (former note 1722359 - SYB: Running SAP applications on SAP ASE - Best Practice).

The guide for normal runtime operation was merged with the guide for migration, but there are some contradictory statements.

Apart from that the study case is again designed for server with huge memory and lot of CPU cores (so not so real case normally, I wonder who setup so often such huge servers...), I have found some inconsistencies.

E.g. in part "Reconfigure Engines and Parallel Processing", they talk about to limit ASE engines to 16, but the command configures 32.

alter thread pool syb_default_pool with thread count = 32, idle timeout = 2000

No change to the previous setup for migration. Is this just typo? I understand it should be 16, and then also number of network tasks for normal operation would be 4 (as mentioned in the beginning of guide that normally you set up 1 per 3-4 engnes). If this is not typo, then number of network tasks is wrong as it should be 8.

Also they introduced idle timeout, but only talking about ERP and possible lower value for Solman - does this mean that for BW you keep default value (which if I am not mistaken is 100)? As per ADM540 you should even decrease this timeout when SAP system is sharing server with database - I know that document is old, but is again contradictory, not saying that it is wrong, but not well explained.

If anybody checked new version of guide, please let me know, I think it is bit messed up and is bit difficult to distinguish what you should set up for migration case and what for normal operation case.

Thanks!

Regards,

Matus

Dear Experts,

I'm having trouble starting up the SapHostEXEC & SAPHostcontrol and its throwing me an error 1053 :

The service did not respond to the start or control request in a timely fashion.I have recently installed the Diagnostic agent and all process are running fine.I have tried allocating service pipe timeouts to 60000 in registry as well as updated sap host agent 720 with patch 185 as well as Microsoft security patch C++ distr package .But still did not work.Checked the permissions for SAPadm ,everything seems to be fine.

According to log it shows not able to get specified file /path but not sure whats going wrong.

OS:Windows 2008 R2

SAPhost agent 720 ,DB: Sybase Ase

Solman Dev system and it's local installation.

Attached the log file.

Suggestion required

Regds

Asim

Hi there,

Is there anyway to remove a device without removing database as the database still in use. thanks in advance.

1> sp_dropdevice QA1_data05

2> go

Msg 17482, Level 16, State 1:

Server 'QA1, Procedure 'sp_dropdevice', Line 110:

Device is being used by a database. You can't drop it.

database_name           device                size

----------------------- --------------------- ----------------------------

QA1                     QA1_data05          10240 MB

Regards,

AM

Hi Experts, Am new to Sybase. As a starter, i want to know the sybase architecture.

about Mandatory background processes etc etc..

Hi Sybase expert,

As part of a reorganization activities, I need to change the datafiles and transaction log to another drive. My question is:

How can i change the datafiles and transaction log paths?

Im on ASE 15.7 and Windows Server

Best Regards ¡¡¡

One of our customers recently contacted us with questions on hibernate and ASE. Not much information is out there to provide the kind of details the customer was seeking. I thought it was a good topic to post on SCN. A disclaimer is in order. The document is provided for the information purposes only. This may not be viewed as any kind of guarantee or certification of Hibernate on ASE.

Briefly, Hibernare is an object to relational mapping middle tier that makes the task of writing java applications against standard relational databases much easier. It is a de facto standard in java/J2EE domain. A simple example of how this works is as follows.

If your application is required to save, retrieve, manipulate data of customers from a customer table in a database that has 3 columns - name, city and zipcode, you would typically create a java class called "Customer" with three properties of name, city and zipcode. Methods on that class such as save, get, modify will use standard JDBC API to implement the required functionality. Anyone who has used JDBC to perform these type of actions realizes how tedious this is to use for hundreds of java classes typically required in any project.

Hibernate, an open source technology managed by Red Hat, makes life easier for a java/jdbc developer. It allows developers to focus on implementing business logic while it takes care of creating, excuting sql statements, converting data types between sql and database data types, looping through result sets, caching frequently used data etc. To follow our example,

Hibernate implemention simply requires us to create an xml file that maps java classes to corresponding database tables. If you have a customer.save method, hibernate creates a sql statement like - insert into customer ......

Hibernate has evolved into group of many other related products over the years. http://hibernate.org provides lot of valuable information. An initiative undertaken in former Sybase a few years back, aimed to provide information to the user community about the ASE's compatibility to hibernate. Majority of the compatibility issues were reviewed and resolved then. They are documented here. Because Hiberante is rapidly evolving and the user community has opted Hibernate as a standard, it is imperative that we provide our users with the latest information on the compatibility. Before we get into the steps taken to ensure compatibility it is important to understand how Hibernate provides a consistent experience across databases from different vendors. We know that almost all standard databases mostly implement jdbc api to provide a consistent user experience. But they also seek to distinguish themselves by providing features not supported by others.

Hibernate deals with these inconsitencies through the use of Dialect files. Dialect files are used to list database functions,  db specific data types, reserved words or keywords and unsupported functionality (example - cascade delete not supported by ASE). Each hibernate module comes with a test folder that includes all the tests for that module. ASE engineering team, the one I belong to, has a scheduled jenkins job that runs tests on hibernate-core module every day. The tests run on Hibernate 4.3.5 and ASE 15.7 SP100. We intend to keep running the tests on the latest certified release of hibernate at the time. Red Hat plans to to run similar tests on their infrastructure so as to catch bugs at an early stage. The process of dealing with bugs is as follows.

When a test is found to be failing a JIRA ticket is created. The incidence is investigated and if determined to be a bug in the hibernate code, then one of the top contributors typically work on it. On the other hand if it is simply a test issue like misusing a keyword for table name then any contributor can fix it. If it is determined that the test is for a new functionality in Hibernate that can not be supported by ASE, then the particular test is annotated for skipping during a test cycle. By re-running these tests often and investigating the results we have been able to identify some key settings on ASE that help reduce the number of test

failures. The settings are believed to help not just in testing but in production scenarios also.

The test results and related information of internal jenkins job is accessible through SAP internal wiki.
In addition  wiki page on Hibernate website also provides valuable information. https://community.jboss.org/wiki/HibernateSybaseintegration

Being an open source project, Hibernate provides source code freely to every one through git hub. You can git clone https://github.com/hibernate/hibernate-orm to get the source code. The dialect files I mentioned before are under hibernate-core/src/main/java/org/hibernate/dialect. The tests are run using a gradle wrapper and instructions although somewhat cryptic are available on hibernate website. Please reach out to me if you need more information on how to run the test suite on ASE.

Hi there,

I found this error everytime i execute command at DBA Cockpit: SQL Command line

Type of command is not allowed to be executed.

FYA, i logged on as user that has SAP_NEW & SAP_ALL profiles. And no issue when i run the command on isql (console version) as syb[SID].

Appreciate for your reply.

Hi Experts,

I am not able to login isql in command prompt . and I'm getting the following error,Can anybody help me in fixing this issue. Is there any default password for it .

I logged in as syb[sid] and exeuted below command and end up with below error :

E:\sybase\EGS\OCS-15_0\bin>isql -S EGS -U sa

Password:

Msg 4002, Level 14, State 1:

Server 'EGS':

Login failed.

CT-LIBRARY error:

        ct_connect(): protocol specific layer: external error: The attempt to co

nnect to the server failed.

E:\sybase\EGS\ASE-15_0\bin>isql -S SOLMAN -U sybegs

Password:

CT-LIBRARY error:

        ct_connect(): directory service layer: internal directory control layer

error: Requested server name not found.

Thanks In Advance,

Satheesh E

Dear gurus,

We have an issue in our PRD system under FlexFrame platform. We SAP NW 7.4 (SP03) with ASE 15.7.0.042 (SuSe SLES 11 SP1) running as BW system.

While uploading data from ERP system, the transactional log was filled. We can see in <SID>.log:

Can't allocate space for object 'syslogs' in database '<SID>' because 'logsegment' segment is full/has no free extents. If you ran out of space in syslogs, dump the transaction log. Otherwise, use ALTER DATABASE to increase the size of the segment.

After this, we increase the transactional log (disk resize). Then, executed ALTER DATABASE <SID> log on <LOGDEVICE> = '<size>'

While ALTER is running the log filesystem was filled (100%), after this, <SID>.log began to grow tremendously.

We stopped Sybase and now, when we try start it all FF node will be down. The filesystem has free space (around 10 GB)

Could you help us?

Add: We think that a posible solution could be to delete the transactional log due to the fact that we understand that the failure is related to this log (maybe corrupted?)

Regards

Hello,

I´ve got several warning messages about SP_DBH_ERRORLOG.

What is the purpose of saptools database?

Thanks

Hi experts,

I am new to the basis, I want to configure basic configuration settings in Solution Manager.Already i created HTTP connection to Solman. When i tried the SOLMAN_SETUP transaction code, It is not getting open.Please help in this.Thanks in advance.

Regards,

Patan Thavaheer.

Dear All ,

i install the ECC IDES 6.0 EHP6 sybase Adaptive Server Enterprise 15.7 on win  2008 X64 .

using install master.  at the last  check ddic password step.message error.  

"Test logon to SAP System IDS failed.   SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."

Kindly look into the following dev_w0.log

---------------------------------------------------

trc file: "dev_w0", trc level: 1, release: "720"

---------------------------------------------------

*

*  ACTIVE TRACE LEVEL           1

*  ACTIVE TRACE COMPONENTS      all, MJ

*

M sysno      00

M sid        IDS

M systemid   562 (PC with Windows NT)

M relno      7200

M patchlevel 0

M patchno    210

M intno      20020600

M make       multithreaded, Unicode, 64 bit, optimized

M profile    \\EGSPL-IDS\sapmnt\IDS\SYS\profile\IDS_DVEBMGS00_EGSPL-IDS

M pid        3820

M

M  kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)

M  length of sys_adm_ext is 588 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 3820) [dpxxdisp.c   1377]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M  DpIPCInit2: read dp-profile-values from sys_adm_ext

M  DpShMCreate: sizeof(wp_adm) 43024 (2264)

M  DpShMCreate: sizeof(tm_adm) 5517056 (27448)

M  DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

M  DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080

M  DpShMCreate: sizeof(comm_adm) 584080 (1144)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M  DpShMCreate: sizeof(slock_adm) 0 (296)

M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M  DpShMCreate: sizeof(file_adm) 0 (80)

M  DpShMCreate: sizeof(vmc_adm) 0 (2152)

M  DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

M  DpShMCreate: sizeof(gw_adm) 48

M  DpShMCreate: sizeof(j2ee_adm) 3952

M  DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FB60050, size: 6374928)

M  DpShMCreate: allocated sys_adm at 000000000FB60060

M  DpShMCreate: allocated wp_adm_list at 000000000FB63070

M  DpShMCreate: allocated wp_adm at 000000000FB63260

M  DpShMCreate: allocated tm_adm_list at 000000000FB6DA80

M  DpShMCreate: allocated tm_adm at 000000000FB6DAD0

M  DpShMCreate: allocated wp_ca_adm at 00000000100B09E0

M  DpShMCreate: allocated appc_ca_adm at 00000000100C03F0

M  DpShMCreate: allocated comm_adm at 00000000100CFE00

M  DpShMCreate: system runs without slock table

M  DpShMCreate: system runs without file table

M  DpShMCreate: allocated vmc_adm_list at 000000001015E7A0

M  DpShMCreate: system runs without vmc_adm

M  DpShMCreate: allocated gw_adm at 000000001015E850

M  DpShMCreate: allocated j2ee_adm at 000000001015E890

M  DpShMCreate: allocated ca_info at 000000001015F810

M  DpShMCreate: allocated wall_adm at 000000001015F8A0

M  DpCommAttachTable: attached comm table (header=00000000100CFE00/ft=00000000100CFE10)

M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm

M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  <ES> EsILock: use spinlock for locking

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

X  mm.dump: set maximum dump mem to 96 MB

M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

M  ThStart: taskhandler started

M  rdisp/thsend_mode : -1 -> 0

M  ThInit: initializing DIA work process W0

M 

M Mon Apr 14 15:11:04 2014

M  ThInit: running on host EGSPL-IDS

M 

M Mon Apr 14 15:11:06 2014

M  calling db_connect ...

B  Loading DB library 'D:\usr\sap\IDS\DVEBMGS00\exe\dbsybslib.dll' ...

B  Library 'D:\usr\sap\IDS\DVEBMGS00\exe\dbsybslib.dll' loaded

B  Version of 'D:\usr\sap\IDS\DVEBMGS00\exe\dbsybslib.dll' is "720.00", patchlevel (0.210)

C  trace file set

C  Callback functions for dynamic profile parameter registered

B  read_con_info_ssfs(): DBSL supports extended connect protocol

B    ==> connect info for default DB will be read from ssfs

C  database is local: connect_timeout: 3

C  Thread ID:6972

C  lib_dbsl 720_REL 02/23/2012 10:32:00

C  Using dynamic link library 'D:\usr\sap\IDS\DVEBMGS00\exe\dbsybslib.dll'

C  dbsybslib.dll patch info

C    SAP patchlevel  0

C    SAP patchno  210

C    Last SYBASE DBSL patchlevel 0

C    Last SYBASE DBSL patchno         210

C    Last SYBASE DBSL patchcomment Sybase ASE R3load fastload is failing (1688468)

C  lpc:(local) connection used on EGSPL-IDS

C 

C Mon Apr 14 15:11:07 2014

C  lpc:(local) connection used on EGSPL-IDS

C 

C Mon Apr 14 15:11:14 2014

C  spid 204 comm rd ODBC

C  spid 207 unc rd ODBC

C  Driver: Adaptive Server Enterprise Driver release: 15.7.0.105

C  Driver full version: Sybase ASE ODBC Driver/15.7.0/ESD#1/P/x86/Windows/drvmain/Build 105/32-bit/Normal/Wed Feb 15 UTC 18:35:16 2012

C  GetServerInfo version: Adaptive Server Enterprise/15.7.0/EBF 20076 SMP ESD#01 Refresh#1/P/X64/Windows Server/aseasap/2926/64-bit/OPT/Thu May 24 01:24:50 2012

C  GetServerInfo release: 15.7.0.012

C  GetServerInfo architecture: unknown

C  GetServerInfo edition: P

C  GetServerInfo byte width: 64 bit

C  DbSlConnect hdl: 0

C  trace file set

B  Connection 0 opened (DBSL handle 0)

M  ThInit: db_connect o.k.

M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf

I  MtxInit: 0 0 0

M  SHM_PRES_BUF (addr: 0000000016150050, size: 4400000)

M  SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)

M  SHM_PAGING_AREA (addr: 0000000016590050, size: 130088960)

M  SHM_ROLL_ADM (addr: 000000001E1B0050, size: 2767448)

M  SHM_PAGING_ADM (addr: 0000000002AA0050, size: 787488)

M  ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000002B80050

M  ThCreateNoBuffer index size: 3000 elems

M  ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002A10050

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  ES initialized.

X  mm.dump: set maximum dump mem to 96 MB

B 

B Mon Apr 14 15:11:24 2014

B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 19, CON_ID = -1

B 

B Mon Apr 14 15:11:28 2014

B  dbtbxbuf: Buffer TABL  (addr: 0000000024A40160, size: 30000000, end: 00000000266DC4E0)

B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1

B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5, parallel_penalty = 0

B  dbtbxbuf: protect_shm = 0, force_checks = 0

B  dbtbxbuf: tsize_retry = 14441728

B  dbtbxbuf: obj_entry_size = 208, nt_genkey_entry_size = 28

B  ***LOG BB0=> buffer TABL       started with length 30000000   bytes [dbtbxbuf     16909]

B  dbtbxbuf: Buffer TABLP (addr: 00000000266E0160, size: 10240000, end: 00000000270A4160)

B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1

B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5, parallel_penalty = 50

B  dbtbxbuf: protect_shm = 0, force_checks = 0

B  dbtbxbuf: tsize_retry = 5053184

B  dbtbxbuf: obj_entry_size = 208, nt_genkey_entry_size = 28

B  ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf     16909]

B  dbtbxbuf: Reading TBX statistics:

B  dbtbxbuf: 3 object entries precreated

B  dbsync[db_syinit]: shared memory successfully created and initialised, sync_adm_p = 0000000002A20050

B  dbsync[db_syinit]: Buffer synchronisation started with

B    sync_concept      = SEQ_NR

B    sendon            = 0

B    bufreftime        = 120

B    max_gap_wait_time = 60

B    ddlog_del_time    = 60

B    last_counter      = -2147483648

B    oldest_gap        = (2147483647,00000000000000)

B    time_of_last_sync = 20140414151128

B    MySysId           = 'EGSPL-IDS           00'

B  dbexpbuf[EXP_SHB]: Aquired semaphore 35 in db_exp_init(EXP_INIT)

B  Layout of EIBUF buffer shared memory:

B  0: 1 * 4 = 4

B  1: 1 * 424 = 424

B  2: 19 * 40 = 760

B  3: 4001 * 52 = 208052

B  4: 2000 * 256 = 512000

B  5: 4001 * 8 = 32008

B  6: 1 * 200 = 200

B  7: 65 * 8 = 520

B  8: 13438 * 256 = 3440128

B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B  dbexpbuf: Buffer EIBUF (addr: 00000000270B0170, size: 4194304, end: 00000000274B0170)

B  ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf     2312]

B  dbexpbuf[EXP_SHB]: semaphore 35 released in db_exp_init

B  dbexpbuf[EXP_SHM]: Aquired semaphore 56 in db_exp_init(EXP_INIT)

B  Layout of ESM   buffer shared memory:

B  0: 1 * 4 = 4

B  1: 1 * 424 = 424

B  2: 19 * 40 = 760

B  3: 4001 * 52 = 208052

B  4: 2000 * 256 = 512000

B  5: 4001 * 8 = 32008

B  6: 1 * 200 = 200

B  7: 65 * 8 = 520

B  8: 13438 * 256 = 3440128

B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B  dbexpbuf: Buffer ESM   (addr: 00000000274C0170, size: 4194304, end: 00000000278C0170)

B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf     2312]

B  dbexpbuf[EXP_SHM]: semaphore 56 released in db_exp_init

B  dbexpbuf[EXP_CUA]: Aquired semaphore 30 in db_exp_init(EXP_INIT)

B  Layout of CUA   buffer shared memory:

B  0: 1 * 4 = 4

B  1: 1 * 424 = 424

B  2: 19 * 40 = 760

B  3: 3001 * 52 = 156052

B  4: 1500 * 256 = 384000

B  5: 3001 * 8 = 24008

B  6: 1 * 200 = 200

B  7: 193 * 8 = 1544

B  8: 4892 * 512 = 2504704

B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B  dbexpbuf: Buffer CUA   (addr: 00000000278D0170, size: 3072000, end: 0000000027BBE170)

B  ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf     2312]

B  dbexpbuf[EXP_CUA]: semaphore 30 released in db_exp_init

B  dbexpbuf[EXP_OTR]: Aquired semaphore 55 in db_exp_init(EXP_INIT)

B  Layout of OTR   buffer shared memory:

B  0: 1 * 4 = 4

B  1: 1 * 424 = 424

B  2: 19 * 40 = 760

B  3: 4001 * 52 = 208052

B  4: 2000 * 256 = 512000

B  5: 4001 * 8 = 32008

B  6: 1 * 200 = 200

B  7: 81 * 8 = 648

B  8: 13438 * 256 = 3440128

B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B  dbexpbuf: Buffer OTR   (addr: 0000000027BC0170, size: 4194304, end: 0000000027FC0170)

B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf     2312]

B  dbexpbuf[EXP_OTR]: semaphore 55 released in db_exp_init

B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf     2211]

B  dbtran INFO (init_connection '<DEFAULT>' [SYBASE:720.00]):

B   max_blocking_factor       =  50,  min_blocking_factor         =   1,

B   max_in_blocking_factor    = 128,  min_in_blocking_factor      =   1,

B   max_union_blocking_factor =  50,  min_union_blocking_factor   =   1,

B   prefer_union_all          =   1,  prefer_join                 =   0,

B   prefer_fix_blocking       =   0,  prefer_in_itab_opt          =   1,

B   convert AVG               =   1,  alias table FUPD            =   0,

B   escape_as_literal         =   0,                                  

B   select *                  =0x0f,  character encoding          = STD / []:X,

B   use_hints                 = abap->1, dbif->0x1, upto->0

M 

M Mon Apr 14 15:11:31 2014

M  SecAudit(rsauinit): Start init of Security Audit Log for first wp.

M  SecAudit(rsauinit): New shared memory created and attached, size = 19488.

M  SecAudit(RsauShmInit): addr of SHM for Audit.... = 0000000002A30050

M  SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0000000002A31050

M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0000000002A31660

M  SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0000000002A31670

M  SecAudit(RsauShmInit): SHM version.............. = 6

M  SecAudit(RsauShmInit): max size of one file..... = 0 KB

M  SecAudit(RsauShmInit): max size of all files.... = 102400 KB

M  SecAudit(RsauShmInit): number of slots available = 90

M  SecAudit(RsauShmInit): number of slots requested = 2

M  SecAudit(RsauShmInit): user selection........... = 0

M  SecAudit(RsauGetCurrentProfile): Init of shared memory completed

M  SecAudit(RsauGetCurrentProfile): Security Audit Log not active

M  SsfSapSecin: automatic application server initialization for SAPSECULIB

N  SsfSapSecin: Looking for PSE in database

N  SsfPseLoad: started...(path=D:\usr\sap\IDS\DVEBMGS00\sec, AS=EGSPL-IDS, instanceid=00)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec (client:    , key: 102635, len: 14851)

N  SsfPseLoadFile: Couldn't open file D:\usr\sap\IDS\DVEBMGS00\sec: Permission denied

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPELEARN200.pse (client:    , key: 172011, len: 1348)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPSNCS.pse (client:    , key: 025318, len: 804)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPSSLA.pse (client:    , key: 025401, len: 4367)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPSSLC.pse (client:    , key: 025427, len: 7806)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPSSLS.pse (client:    , key: 145420, len: 1840)

N  SsfPseLoad: Downloading file D:\usr\sap\IDS\DVEBMGS00\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 8875)

N  SsfPseLoad: ended (6 of 7 sucessfully loaded, 7 checked...

N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.

N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.

N  SignInitOnce: Security Context Cache created (max. 2500 entries, 1305600 bytes)

N  No SEC_CONTEXT_COPY records found for deletion

I  MPI: dynamic quotas disabled.

I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

M  rdisp/setactfields_late : -1 -> 0

M  CCMS uses Shared Memory Key 73 for monitoring.

M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.

M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.

G 

G Mon Apr 14 15:11:32 2014

G  GetWritePermissionForShm( pLocation =  94, pEnforce = 1 )

G 

G Mon Apr 14 15:11:33 2014

G  RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )

G  GetWritePermissionForShm( pLocation =  99, pEnforce = 1 )

G  RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )

S  *** init spool environment

S  TSPEVJOB updates outside critical section: event_update_nocsec = 1

S  initialize debug system

T  Stack direction is downwards.

T  debug control: prepare exclude for printer trace

T  new memory block 0000000028334770

S 

S Mon Apr 14 15:11:34 2014

S  spool kernel/ddic check: Ok

S  using table TSP02FX for frontend printing

S  1 spool work process(es) found

S  frontend print via spool service enabled

S 

S Mon Apr 14 15:11:35 2014

S  printer list size is 150

S  printer type list size is 50

S  queue size (profile)   = 300

S  hostspool list size = 3000

S  option list size is 30

S      found processing queue enabled

S  found spool memory service RSPO-RCLOCKS at 00000000318C00D0

S  doing lock recovery

S  setting server cache root

S  found spool memory service RSPO-SERVERCACHE at 00000000318C06A0

S    using messages for server info

S  size of spec char cache entry: 297032 bytes (timeout 100 sec)

S  size of open spool request entry: 2512 bytes

S  immediate print option for implicitely closed spool requests is disabled

A  ***GENER* Trace switched on ***

A 

A  ---PXA-------------------------------------------

A  PXA INITIALIZATION

A  System page size: 4kb, total admin_size: 22516kb, dir_size: 21724kb.

A  Attached to PXA (address 000007FFEDAB0050, size 300000K, 1 fragments of 277484K )

A  PXA allocated (address 000007FFEDAB0050, size 300000K)

A  abap/pxa = shared protect gen_remote

A  PXA: checking structure sizes: 752|264|16

A  PXA INITIALIZATION FINISHED

A  ---PXA-------------------------------------------

A 

A  ATRA: pfclock execution time = 0

A 

A Mon Apr 14 15:11:36 2014

A  ABAP ShmAdm attached (addr=000007DFF6180000 leng=20955136 end=000007DFF757C000)

A  >> Shm MMADM area (addr=000007DFF6677B80 leng=242240 end=000007DFF66B2DC0)

A  >> Shm MMDAT area (addr=000007DFF66B3000 leng=15503360 end=000007DFF757C000)

A  RFC Destination> destination EGSPL-IDS_IDS_00 host EGSPL-IDS system IDS systnr 0 (EGSPL-IDS_IDS_00)

A  RFC Options> H=EGSPL-IDS,S=00,d=2,

A  RFC FRFC> fallback activ but this is not a central instance.

A   

A  RFC rfc/signon_error_log = -1

A  RFC rfc/dump_connection_info = 0

A  RFC rfc/dump_client_info = 0

A  RFC rfc/cp_convert/ignore_error = 1

A  RFC rfc/cp_convert/conversion_char = 23

A  RFC rfc/wan_compress/threshold = 251

A  RFC rfc/recorder_pcs not set, use defaule value: 2

A  RFC rfc/delta_trc_level not set, use default value: 0

A  RFC rfc/no_uuid_check not set, use default value: 0

H  HTTP> Parameter icf/ssocookie_mandatory set to 0

M  ThrCreateShObjects allocated 39514 bytes at 0000000002A50050

Y  dyWpInit

Y    ztta/dynpro_ara 800000

Y    ztta/cua_ara    500000

Y    ztta/diag_ara   250000

N  SsfSapSecin: getenv(SECUDIR)=="D:\usr\sap\IDS\DVEBMGS00/sec"

N  SsfSapSecin: PSE D:\usr\sap\IDS\DVEBMGS00\sec\SAPSYS.pse found!

N 

N  =================================================

N  === SSF INITIALIZATION:

N  ===...SSF Security Toolkit name SAPSECULIB .

N  ===...SSF library is D:\usr\sap\IDS\DVEBMGS00\exe\sapcrypto.dll .

N  ===...SSF default hash algorithm is SHA1 .

N  ===...SSF default symmetric encryption algorithm is DES-CBC .

N 

N Mon Apr 14 15:11:37 2014

N  ===...SECUDIR="D:\usr\sap\IDS\DVEBMGS00/sec"

N  ===...loading of Security Toolkit successfully completed.

N  ===   SAPCRYPTOLIB  5.5.5C pl32  (Apr  2 2011) MT-safe

N  =================================================

N 

N Mon Apr 14 15:11:54 2014

N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.

N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.

M  JrfcVmcRegisterNativesDriver o.k.

W  =================================================

W  === ipl_Init() called

W    ITS Plugin: Path dw_gui

W    ITS Plugin: Description ITS Plugin - ITS rendering DLL

W    ITS Plugin: sizeof(SAP_UC) 2

W    ITS Plugin: Release: 720, [7200.0.210.20020600]

W    ITS Plugin: Int.version, [33]

W    ITS Plugin: Feature set: [29]

W    ===... Calling itsp_Init in external dll ===>

W 

W Mon Apr 14 15:11:55 2014

W  === ipl_Init() returns 0, ITSPE_OK: OK

W  =================================================

N  SignInit: successfully obtained handle for Security Context cache

N  VSI: WP init in ABAP VM completed with rc=0

E 

E Mon Apr 14 15:11:57 2014

E  EnqLockTableAttach2: attach to lock table (size = 33554432)

E  EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE

E  EnqId_Initialize: local EnqId initialization o.k.

M 

M Mon Apr 14 15:11:59 2014

M  14.04.2014 09:41:59.598 PID=3820, TID=6972 SapTimer info. v1.119 SynchCount:0 , OwnerPid: 6408, ErrsCount: 0, SapTime-WindowsUtcTime=-7 millisec (max=-7), Nosync=67 sec, SynchsPerDay=0.000000, MaxQpcTimeMinusWindowsTimeMismatch:  +0 millisec, TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-7 millisec (*)

A 

A Mon Apr 14 15:12:06 2014

A  UpdateProfile (new settings): off,krn_impl,(no dyn check),(no logging),(no stat err),(local generation),(no commit)

A  UpdateProfile (new exceptions): (tmp_err),(home_err),(local_err)

A  UpdateProfile (new version): 0

A  *GENER* starting remote generation: SAPMSSY2 (requested by W5).

A  *GENER* got lock for program SAPMSSY2.

C  ERROR: -1 in function StartSelect (execute) [line 17173]

C  (208) [42000] [Sybase][ODBC Driver][Adaptive Server Enterprise]D010ENH not found. Specify owne

C  r.objectname or use sp_help to check whether the object exists (sp_help may prod

C  uce lots of output).

C 

C  sql statement is ==> SELECT * FROM "D010ENH" WHERE "IS_ENH" = ? AND "PROGRAMNAME" = ? ORDER BY "IS_EN

C  H" ,"PROGRAMNAME" ,"VERSION" ,"ENHNAME" ,"ID"

C  /* R3::0 T:D010ENH M:000 */

C   /*10

C  */

B  ***LOG BZA=> table D010ENH    does not exist on database R/3        [dbtran       7618]

B  *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='D010ENH'}

[dbrsbuf.c    2220]

B  {root-id=0008A18F03111EE3B0F720B93F2FB0A2}_{conn-id=00000000000000000000000000000000}_0

C  ERROR: -1 in function StartSelect (execute) [line 17173]

C  (208) [42000] [Sybase][ODBC Driver][Adaptive Server Enterprise]D010ENH not found. Specify owne

C  r.objectname or use sp_help to check whether the object exists (sp_help may prod

C  uce lots of output).

C 

C  sql statement is ==> SELECT * FROM "D010ENH" WHERE "IS_ENH" = ? AND "PROGRAMNAME" = ? ORDER BY "IS_EN

C  H" ,"PROGRAMNAME" ,"VERSION" ,"ENHNAME" ,"ID"

C  /* R3::0 T:D010ENH M:000 */

C   /*10

C  */

B  ***LOG BZA=> table D010ENH    does not exist on database R/3        [dbtran       7618]

A  TH VERBOSE LEVEL FULL

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_ROLLBACK entered.

A  *GENER* Performing ROLLBACK.

A  ** RABAX: level LEV_RX_ROLLBACK completed.

A  ** RABAX: level LEV_RX_DB_ALIVE entered.

A  ** RABAX: level LEV_RX_DB_ALIVE completed.

A  ** RABAX: level LEV_RX_HOOKS entered.

A  ** RABAX: level LEV_RX_HOOKS completed.

A  ** RABAX: level LEV_RX_STANDARD entered.

A  ** RABAX: level LEV_RX_STANDARD completed.

A  ** RABAX: level LEV_RX_STOR_VALUES entered.

A  ** RABAX: level LEV_RX_STOR_VALUES completed.

A  ** RABAX: level LEV_RX_C_STACK entered.

A 

A Mon Apr 14 15:12:08 2014

A  ** RABAX: level LEV_RX_C_STACK completed.

A  ** RABAX: level LEV_RX_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_INTERFACES entered.

A  ** RABAX: level LEV_RX_INTERFACES completed.

A  ** RABAX: level LEV_RX_GET_MESS entered.

A  ** RABAX: level LEV_RX_GET_MESS completed.

A  ** RABAX: level LEV_RX_INIT_SNAP entered.

A  ** RABAX: level LEV_RX_INIT_SNAP completed.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP entered.

A  ** RABAX: level LEV_SN_END completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END completed.

A  ** RABAX: level LEV_RX_SET_ALERT entered.

A  ** RABAX: level LEV_RX_SET_ALERT completed.

A  ** RABAX: level LEV_RX_COMMIT entered.

A  ** RABAX: level LEV_RX_COMMIT completed.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A  ** RABAX: level LEV_RX_RESET_PROGS entered.

A  ** RABAX: level LEV_RX_RESET_PROGS completed.

A  ** RABAX: level LEV_RX_STDERR entered.

A  Mon Apr 14 15:12:08 2014

A 

A  Generating ABAP Program SAPMSSY2                                .

A  Source ???????????????????????????????????????? Line 0.

A  Error Code DBIF_RSQL_TABLE_UNKNOWN.

A  Module  $Id: //bas/720_REL/src/krn/gen/scsyenh.c#4 $ SAP.

A  Function performRsqlD010enh Line 1149.

A  ** RABAX: level LEV_RX_STDERR completed.

A  ** RABAX: level LEV_RX_RFC_ERROR entered.

A  ** RABAX: level LEV_RX_RFC_ERROR completed.

A  ** RABAX: level LEV_RX_RFC_CLOSE entered.

A  ** RABAX: level LEV_RX_RFC_CLOSE completed.

A  ** RABAX: level LEV_RX_IMC_ERROR entered.

A 

A Mon Apr 14 15:12:09 2014

A  ** RABAX: level LEV_RX_IMC_ERROR completed.

A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A  ** RABAX: level LEV_RX_ERROR_SAVE entered.

A  ** RABAX: level LEV_RX_ERROR_SAVE completed.

A  ** RABAX: level LEV_RX_ERROR_TPDA entered.

A  ** RABAX: level LEV_RX_ERROR_TPDA completed.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A  ** RABAX: level LEV_RX_END entered.

A  ** RABAX: level LEV_RX_END completed.

A  ** RABAX: end RX_GOTO_GENEXIT

A 

A Mon Apr 14 15:12:27 2014

A  *GENER* request remote generation: SAPMSSY2.

A 

A Mon Apr 14 15:12:28 2014

A  *GENER* starting inline generation: SAPMSSY2 (reason: compile error during remote generation).

A  *GENER* got lock for program SAPMSSY2.

C 

C Mon Apr 14 15:12:31 2014

C  ERROR: -1 in function StartSelect (execute) [line 17173]

C  (208) [42000] [Sybase][ODBC Driver][Adaptive Server Enterprise]D010ENH not found. Specify owne

C  r.objectname or use sp_help to check whether the object exists (sp_help may prod

C  uce lots of output).

C 

C  sql statement is ==> SELECT * FROM "D010ENH" WHERE "IS_ENH" = ? AND "PROGRAMNAME" = ? ORDER BY "IS_EN

C  H" ,"PROGRAMNAME" ,"VERSION" ,"ENHNAME" ,"ID"

C  /* R3::0 T:D010ENH M:000 */

C   /*10

C  */

B  ***LOG BZA=> table D010ENH    does not exist on database R/3        [dbtran       7618]

A  TH VERBOSE LEVEL FULL

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_ROLLBACK entered.

A  *GENER* Performing ROLLBACK.

A  ** RABAX: level LEV_RX_ROLLBACK completed.

A  ** RABAX: level LEV_RX_DB_ALIVE entered.

A  ** RABAX: level LEV_RX_DB_ALIVE completed.

A  ** RABAX: level LEV_RX_HOOKS entered.

A  ** RABAX: level LEV_RX_HOOKS completed.

A  ** RABAX: level LEV_RX_STANDARD entered.

A  ** RABAX: level LEV_RX_STANDARD completed.

A  ** RABAX: level LEV_RX_STOR_VALUES entered.

A  ** RABAX: level LEV_RX_STOR_VALUES completed.

A  ** RABAX: level LEV_RX_C_STACK entered.

A 

A Mon Apr 14 15:12:33 2014

A  ** RABAX: level LEV_RX_C_STACK completed.

A  ** RABAX: level LEV_RX_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_INTERFACES entered.

A  ** RABAX: level LEV_RX_INTERFACES completed.

A  ** RABAX: level LEV_RX_GET_MESS entered.

A  ** RABAX: level LEV_RX_GET_MESS completed.

A  ** RABAX: level LEV_RX_INIT_SNAP entered.

A  ** RABAX: level LEV_RX_INIT_SNAP completed.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP entered.

A  ** RABAX: level LEV_SN_END completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END completed.

A  ** RABAX: level LEV_RX_SET_ALERT entered.

A  ** RABAX: level LEV_RX_SET_ALERT completed.

A  ** RABAX: level LEV_RX_COMMIT entered.

A  ** RABAX: level LEV_RX_COMMIT completed.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A  ** RABAX: level LEV_RX_RESET_PROGS entered.

A  ** RABAX: level LEV_RX_RESET_PROGS completed.

A  ** RABAX: level LEV_RX_STDERR entered.

A  Mon Apr 14 15:12:33 2014

A 

A  Generating ABAP Program SAPMSSY2                                .

A  Source ???????????????????????????????????????? Line 0.

A  Error Code DBIF_RSQL_TABLE_UNKNOWN.

A  Module  $Id: //bas/720_REL/src/krn/gen/scsyenh.c#4 $ SAP.

A  Function performRsqlD010enh Line 1149.

A  ** RABAX: level LEV_RX_STDERR completed.

A  ** RABAX: level LEV_RX_RFC_ERROR entered.

A  ** RABAX: level LEV_RX_RFC_ERROR completed.

A  ** RABAX: level LEV_RX_RFC_CLOSE entered.

A  ** RABAX: level LEV_RX_RFC_CLOSE completed.

A  ** RABAX: level LEV_RX_IMC_ERROR entered.

A  ** RABAX: level LEV_RX_IMC_ERROR completed.

A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A  ** RABAX: level LEV_RX_ERROR_SAVE entered.

A  ** RABAX: level LEV_RX_ERROR_SAVE completed.

A  ** RABAX: level LEV_RX_ERROR_TPDA entered.

A  ** RABAX: level LEV_RX_ERROR_TPDA completed.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A  ** RABAX: level LEV_RX_END entered.

A  ** RABAX: level LEV_RX_END completed.

A  ** RABAX: end RX_GOTO_GENEXIT

A  TH VERBOSE LEVEL FULL

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.

A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.

A  ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.

A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.

A  ** RABAX: level LEV_RX_ROLLBACK entered.

A  ** RABAX: level LEV_RX_ROLLBACK completed.

A  ** RABAX: level LEV_RX_DB_ALIVE entered.

A  ** RABAX: level LEV_RX_DB_ALIVE completed.

A  ** RABAX: level LEV_RX_HOOKS entered.

A  ** RABAX: level LEV_RX_HOOKS completed.

A  ** RABAX: level LEV_RX_STANDARD entered.

A  ** RABAX: level LEV_RX_STANDARD completed.

A  ** RABAX: level LEV_RX_STOR_VALUES entered.

A  ** RABAX: level LEV_RX_STOR_VALUES completed.

A  ** RABAX: level LEV_RX_C_STACK entered.

A  ** RABAX: level LEV_RX_C_STACK completed.

A  ** RABAX: level LEV_RX_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.

A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.

A  ** RABAX: level LEV_RX_INTERFACES entered.

A  ** RABAX: level LEV_RX_INTERFACES completed.

A  ** RABAX: level LEV_RX_GET_MESS entered.

A  ** RABAX: level LEV_RX_GET_MESS completed.

A  ** RABAX: level LEV_RX_INIT_SNAP entered.

A  ** RABAX: level LEV_RX_INIT_SNAP completed.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP completed.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END entered.

A  ** RABAX: level LEV_RX_WRITE_SNAP_END completed.

A  ** RABAX: level LEV_RX_SET_ALERT entered.

A  ** RABAX: level LEV_RX_SET_ALERT completed.

A  ** RABAX: level LEV_RX_COMMIT entered.

A  ** RABAX: level LEV_RX_COMMIT completed.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A  ** RABAX: level LEV_RX_RESET_PROGS entered.

A  ** RABAX: level LEV_RX_RESET_PROGS completed.

A  ** RABAX: level LEV_RX_STDERR entered.

A  ** RABAX: level LEV_RX_STDERR completed.

A  ** RABAX: level LEV_RX_RFC_ERROR entered.

A  ** RABAX: level LEV_RX_RFC_ERROR completed.

A  ** RABAX: level LEV_RX_RFC_CLOSE entered.

A  ** RABAX: level LEV_RX_RFC_CLOSE completed.

A  ** RABAX: level LEV_RX_IMC_ERROR entered.

A  ** RABAX: level LEV_RX_IMC_ERROR completed.

A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A  ** RABAX: level LEV_RX_ERROR_SAVE entered.

A  ** RABAX: level LEV_RX_ERROR_SAVE completed.

A  ** RABAX: level LEV_RX_ERROR_TPDA entered.

A  ** RABAX: level LEV_RX_ERROR_TPDA completed.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A  ** RABAX: level LEV_RX_END entered.

A  ** RABAX: level LEV_RX_END completed.

A  ** RABAX: end no http/smtp

A  ** RABAX: end RX_BTCHLOG|RX_VBLOG

E 

E Mon Apr 14 15:13:07 2014

E  Enqueue Info: enque/use_pfclock2 = FALSE

E  Enqueue Info: row condense enabled

M 

M Mon Apr 14 16:04:58 2014

M  in_ThErrHandle: 1

M Mon Apr 14 16:04:59 2014

M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   

M  ThIErrHandle: I'm during shutdown

M  PfStatDisconnect: disconnect statistics

M  ThIErrHandle: entering ThSetStatError

M Mon Apr 14 16:05:00 2014

M  Pipe read request: 2 anz: 64

C Mon Apr 14 16:05:01 2014

C  SybBreak

B  db_sqlbreak() = 15

M  *** WARNING => ThCallDbBreak: db_sqlbreak failed (16388), caller=ThIErrHandle

M  ThIErrHandle: don't try rollback again

M  ThShutDownServer: shutdown server

M  Signal handling in an APC of the main thread (signal SIGINT)

M Mon Apr 14 16:05:02 2014

M  PfWriteIntoFile: shared buffer is empty.

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M 

M Mon Apr 14 16:05:04 2014

M  call ThrShutDown (1)...

B 

B Mon Apr 14 16:05:05 2014

B  Disconnecting from ALL connections:

B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program                                

B  000 000 R/3              000000000 INACTIVE     NO  NO  NO  YES NO  NO  000 255 255 20140414 151106 EGSPL-IDS                                               

C  DbSlDisconnect hdl: 0

B 

B Mon Apr 14 16:05:28 2014

B  Disconnected from connection 0

B  statistics db_con_commit (com_total=20, com_tx=5)

B  statistics db_con_rollback (roll_total=4, roll_tx=4)

M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 3820) [dpnttool.c   339]

Hi Expert,

What are the steps for Mount IBM Tape drive on windows 2008 SAP Platform on Sybase Database ?

After mounting IBM Tape Drive on windows 2008 SAP Platform , can i use this for Sybase Backup purpose from DBACOKPIT ?

Kindly reply me ASAP.

Hi Experts,

I am new to the BASIS.We have an early watch session in next week.Now SAP people is asking for Backend system details.We have DEV,QAS,PRD,SOLMAN,IDES servers.Now what is the backend system in our system.Please help in this.

Thanks in advance.

Regards,

Patan Thavaheer.